MXM FX Delay
An everyday delay with three characters: clean, early digital and tape. Up to eight seconds, free or in time with the host, with ducking and a freeze.

Sound
MXM FX Delay has three models. Clean gives clear, full-range repeats. Vintage digital is a fixed memory read by a clock that changes speed, so the delay’s range, its conversion and its bandwidth are tied together, for the grainy, darker sound of early digital delays. Tape is a moving medium, where speed, playback loss and the motion of the transport are tied together, for warm repeats that waver. The models and their constants are our own, and none claims to reproduce a named machine.
Character moves any model towards dark and worn. Every repeat passes through Low cut, High cut and Drive inside the feedback loop, so they shape what you hear and what goes round again. Feedback reaches unity near the top of its travel, and past that a saturator keeps the build-up in bounds.
Using it
Time runs from 5 ms to 8 s, or in note lengths from 1/64 to a whole note when synced to the host. Change decides what the echoes do when you move the time: Repitch bends their pitch, like tape, Fade crossfades to the new time, and Jump goes straight there without a click.
Routing places the echoes in stereo. Standard keeps the source’s own stereo picture, Dual gives left and right their own times, spread by Offset, and Ping-pong bounces the echoes from side to side. Stereo input is never summed to mono. Motion, Rate and Shape make the delay time waver, in time with the host if you like.
Duck lowers only the echoes while you play, so they fill the gaps. Freeze holds the echoes already in the line and repeats them for as long as it is on, letting no new sound in.
Mix is a straight crossfade between dry and echoes. At 0 % the output is exactly the dry signal and the echoes are cleared, so turning Mix up again starts from an empty line. Factory presets leave your Mix where it is, so a delay on an insert or on a send keeps its balance while you browse.
The editor
Five cards: Time, Routing, Feedback, Character and Output. A timeline shows the left and right repeat times and the motion around them, a diagram shows the routing, and the Output card has meters for the input, the echoes and the output beside Duck and Mix. Every control is on the cards, with nothing behind an Advanced button. The editor opens at 1287 × 412 and can shrink to 392 × 360.
Presets
50 factory presets covering clean utility echoes, stereo and ping-pong, vintage digital, tape, dub and motion, listed in alphabetical order. Init is the complete default patch, with the delay engaged and Mix at 35 %.
Status
Beta. MXM FX Delay is done and tested.